$1,475 · Atlas 10" Metal Lathe and Accessories

This, not only beautiful but useful antique (70yrs old) has been restored to perfect working order. It comes on a nicely crafted welded steel stand on heavy duty 5" castors. The stand is as old as the lathe and the castors are relatively new - they make the heavy beast very easy to move around. I can't display enough photos here to do justice to the enormity of the unit and the accessories that go with it, but I'll try to list them. Another separate piece of equipment that comes with it is an old drill sharpener (BK-65) made by the makers of the new Drill Doctor that allows one to sharpen drills up to 2" or more. The unit comes with the industrial Timken Bearings as opposed to the lighter duty Babbitt (sleeve bearings). It also comes with a very good, bound, copy of the original manual. From the front edge of the headstock spindle to the end of the bed measures exactly 45 inches. Between centres is approx 32 plus inches. Accessories: Complete set of screw cutting gears Left hand, right and straight tool holders 3 Jaw chuck (for internal or external holding 4 Jaw chuck Various lathe Dogs Threading tool Cut-Off tool 8 1/2" Face Plate with angle plate ( & other plate type holders) Steady Rest/ Centre Rest Knurling tool Milling attachment Two surface Gauges Tool Post for Boring Bars (3/8, 1/2 & 3/4) 3 Boring Bars Many centres of different types, metal and wood Adapters for different Morse Tapers 2 Morse Taper drill chucks with chuck keys Brass Hammer All the tools, chuck keys, square keys, wrenches etc. needed 1 headstock drill chuck with chuck key - has internal taper for tailstock mounting. Approx 50 Morse Taper Drills between 5/16 and 1 inch Several Reamers, some unused Several milling cutters (most brand new, unused) Lots of tool steel (used and unused) And some other stuff I haven't identified yet. Call Sheldon @ 250-655-9305